CD 3.4 Condenser with Steel Fan Cover and Motor

• Customization: Available
• After-sales Service: Support
• Warranty: 2 Year
• Model NO.: CD3.4
• Type: Evaporative Air Cooler
• Air Tube Material: Galvanized Sheet
• Operating Voltage: 230 VAC
• Noise Level: Low
• Application Fields: Aerospace
• Mounting: Wall/Window Mount
• Lifetime: 10~15 years
• Certification: RoHS
• Condition: New
• Material: Copper Tube, Aluminium Fin, Steel Cover
• Use: Cold Room
• Inlet Dia: 10, 12, 16, 19, 22, 28, 35, 42
• Outlet Dia: 10, 12, 16, 19, 22, 28, 35, 42
• Install Size: 270*65-2940*940
• Tested Pressure: 2.8MP
• Transport Package: Cartons, Then Pallet or According to Customer
• Specification: rohs, ISO9001
• Trademark: Jretek
• Origin: Zhejiang
• HS Code: 8418
• Production Capacity: 10000 PCS/Month

Product Description

CD 3.4 Condenser with Steel Fan cover and motor
 

Material	Copper,aluminium,galvanized plate,stainless  steel plate
Copper pipe dia	7mm 7.94mm 9.52mm
Aluminium foil	Hydrophilic or bare
Fin type	Louver fin,flat fin

1. Material: Copper, aluminum, galvanized plate<o: P>

2. Aluminum foil: Hydrophilic or bare<o: P>

3. Fin type: Louver fin or flat fin and slit or corrugated fin<o: P>

4. Copper pipe: Diameter 7mm or 9.52mm or 10mm above, inner screw thread or smooth tube<o: P>

5. Spec: Different size, pitch of fins can be adjusted between 1.85.8mm. <o: P>

6. Voltage: 220V/1/50HZ and 380V/3/50HZ. <o: P>
7. Different alternative condensing fans available: Shaded pole or outer rotor fan motor. <o: P>
8. Did gas examination under 3.0Mpa air pressure to ensure the tightness. <o: P>

9. Condenser type: <o: P>

Side-exhausted with single fan, double fan, triple fan and fourfold fan, heat exchange surface is from 2 square meter to 180 square meter<o: P>

Top-exhausted with double fan and triple fan, heat exchange surface is from 80 square meter to 600square meter. <o: P>
10. Widely used in refrigeration industry, cold room and other system. <o: P>

11. We can supply products as per customized samples or drawing. <o: P>

12. Producing procedure: Tube bending, punching fin, expanding, digressing, drying<o: P>

Welding, leakage test, bending, inspection, packing