Water dispenser condenser, Water cooler condenser, Wire condensers for water coolers
Water Dispenser Condenser
1) Rolling welded steel tube: O. Dφ 4.76mm~O. Dφ 6.35mm, wall thickness 0.71mm
2) Low carbon steel wire O. Dφ 1.4mm~φ 1.6mm
1)Surface with electrophoresis coating to prevent the corrosion.
2)Inner cleanness can meet the requirement of CFC &R134A cooling system.
3)Can satisfy the cooling capability requirements.
Specification of R134A refrigerator
Residual moisture ≤ 20mg/M2
Residual impurity ≤ 30mg/M2
Residual mineral oil ≤ 7mg/M2
Residual chlorine ≤ 0.3mg/M2
Residual paraffin ≤ 0.2mg/M2
Specification of coating
Coating thickness thickness of cathodic electrophoresis Coating≥ 18μ M;
Hardness of coating ≥ 2H
Impact of coating 50cm. Kg/cm impact, no crack
Adhesion of coating ≥ Two grade
Flexibility of coating Around R=3D bebd 180° , no crack or no fall off Color tolerance of E≤ 1.5
Corrosion resistant (salt spray GB2423) ≥ 150h.
We also can provide the product according customer's drawing or samples.
If any needs, pls contact me
|A\flat type of wire on tube condenser used at the back;|
|B\bended or spiral type of wire on tube condenser used at the bottom;|
|C\wrapped type of tube embed on plate.|
|Performance:||1\Surface with electrophoresis coating to prevent the corrosion.|
|2\Inner cleaness can meet the requirement of CFC&R134A cooling system.|
|3\Can satisfy different cooling capability requirements.|