Fnh Series Copper Tube Aluminium Fin Type Condenser for Cold Room
| material |
Copper aluminium galvanized plate |
| Copper tube |
7mm 7.94mm 9.52mm |
| Tube type |
Inner grooved or bare type |
| Fin type |
Louver fin,flat fin,conrrugrated fin |
| Picth of fin |
1.8-5.8mm |
1. Material: Copper, aluminum, galvanized plate<o: P>
2. Aluminum foil: Hydrophilic or bare<o: P>
3. Fin type: Louver fin or flat fin and slit or corrugated fin<o: P>
4. Copper pipe: Diameter 7mm or 9.52mm or 10mm above, inner screw thread or smooth tube<o: P>
5. Spec: Different size, pitch of fins can be adjusted between 1.85.8mm. <o: P>
6. Voltage: 220V/1/50HZ and 380V/3/50HZ. <o: P>
7. Different alternative condensing fans available: Shaded pole or outer rotor fan motor. <o: P>
8. Did gas examination under 3.0Mpa air pressure to ensure the tightness. <o: P>
9. Condenser type: <o: P>
Side-exhausted with single fan, double fan, triple fan and fourfold fan, heat exchange surface is from 2 square meter to 180 square meter<o: P>
Top-exhausted with double fan and triple fan, heat exchange surface is from 80 square meter to 600square meter. <o: P>
10. Widely used in refrigeration industry, cold room and other system. <o: P>
11. We can supply products as per customized samples or drawing. <o: P>
12. Producing procedure: Tube bending, punching fin, expanding, digressing, drying<o: P>
Welding, leakage test, bending, inspection, packing<o: P>
Audited Supplier 
){kind=link}
){kind=link}