Retekool Thermodynamic Solar Panel
|FOB Price:||US $150 / Piece|
|Min. Order:||50 Pieces|
|Min. Order||FOB Price|
|50 Pieces||US $150/ Piece|
|Payment Terms:||L/C, T/T, D/P, Western Union, Paypal|
- Model NO.: RETEK-206
- Concentrating: Yes
- Application: Water Heater, Solar Thermal, Air Conditioning System
- Raw Material: Aluminium Plate and Copper Tube
- Trademark: retekool
- Specification: 2000x800x1.5mm
- HS Code: 84189999
- Certification: ISO
- Type: Flat Panel
- Pipe Material: Aluminium Plate
- Item: Roll Bonded Thermodynamic Solar Panel for Hot Wat
- Transport Package: Packed by Seaworthy Carton, Pallet or Wooden Box
- Origin: China
A thermodynamic panel is fitted to the outside of the property, usually on a south facing wall or roof. Refrigerant enters the panel at -22°C and is heated by the air around the panel until it becomes a gas. This heat can come from the air, sun or rain as long as the outside temperature is above -22°C. The gas then passes through a compressor which increases the temperature. The heat is released into the water tank through a heat exchange coil to a maximum temperature of 55°C. The cooler refrigerant then circulates back to the panel to be warmed again. The system uses a small amount of electricity to run but mostly relies on the ambient heat outside. For every unit of electricity used, the system will generate 3 - 6 units of heat for your home.
Material: Aluminium 1060/1050
Size: 1700*800, 2000*800, 2000*1000, 1700*500, 1700*900, 1700*990mm
Max Size: 1150mm(width)*2300mm(length)
Key process: Prepare the material, Cleaning, roughing surface, Printing, Riveting, Rolling, Annealing, Blow up, Punching, Folding and shaping, Capillary connecting, Assembly welding, Leakage Test, Cleaning and drying, Coating, Curing, Inspection, Packing
· Do not nee sunlight to generate heat, they can work day or night in all conditions including rain or snow.
· Can provide all hot water requirements up to 55° C
· Significantly reduce CO2 emissions, making yr home greener
· More smaller and more discreet than solar panels and do not need to be roof mounted
· Easy to install.
|Raw material||Al-plate: finished products thickness: 1.1 ~ 2.0mm,|
raw material Al plate thickness: 1.4 ~ 2.5mm
|Structure||Double side rollbond evaporator,|
single side rollbond evaporator,
part single side rollbond evaporator
|Key process||Prepare the material, Cleaning, roughing surface, Printing, Riveting, Rolling, Annealing, Blow up, Punching, Folding and shaping, Capillary connecting, Assembly welding, Leakage Test, Cleaning and drying, Coating, Curing, Inspection, Packing|
|Technical Standards||1) Size: width 590mm (max), length 2050mm (max)|
2) Can produce according to the drawing or sample supplied by clients, also can help the clients design and produce different models of roll bond evaporator.
|Performance||1) Surface treated with powder painting to prevent the corrosion|
2) Inner cleanness can meet the requirement of R134a & CFC cooling system.
3) Can satisfy the cooling capability requirements.
|Performance||3.5 million sets per year (10000 sets per day)|