Spiral condenser/plate tube condenser
Specifications:
1) Raw material:
A) Rolling welded steel tube: 4.76 ~ 6.35 X 0.71
B) Low carbon steel wire: 1.4 ~ 1.6mm
C) Bracket: Steel plate SPCC thickness 0.6~2.0
D) Base mounting plate: SPCC thickness 0.6~2.0
2) Technical standards: Can produce according to clients' drawing or samples
3) Performance:
A) Surface with electrophoresis coating to prevent the corrosion
B) Inner cleanness can meet the requirement of R134A and CFC cooling system
C) Can satisfy the cooling capability requirements
Structure:
Wrapped type of tube embed on plate
R134A cooling system tube inside standard:
1) Residual moisture: ≤ 20mg/m²
2) Residual dusty: ≤ 30mg/m²
3) Residual mineral oil: ≤ 7mg/m²
4) Residual chlorine: ≤ 3mg/m²
5) Sealing density: ≥ 1.65MPa
Specification of E-coating:
1) Coating thickness:
A) Thickness of anodic electrophoresis coating: ≥ 12μ M
B) Thickness of cathodic electrophoresis coating: ≥ 20μ M
2) Hardness of coating: ≥ 2H
3) Impact of coating: 50cm. Kg/cm impact, no crack
4) Adhesion of coating: ≥ 2 grades
5) Flexibility of coating: Around R=3D bend 180 degrees, no crack or no fall off
6) Corrosion resistant (salt spray GB2423)
A) Anodic electrophoresis coating: ≥ 24hrs
B) Cathodic electrophoresis coating: ≥ 96hrs
We can supply the items according to customers' drawings or samples.
| Structure: |
A\flat type of wire on tube condenser used at the back; |
| B\bended or spiral type of wire on tube condenser used at the bottom; |
| C\wrapped type of tube embed on plate. |
| Performance: |
1\Surface with electrophoresis coating to prevent the corrosion. |
| 2\Inner cleaness can meet the requirement of CFC&R134A cooling system. |
| 3\Can satisfy different cooling capability requirements. |
Audited Supplier 
){kind=link}
){kind=link}